How To Save a Botched Batch of Grainy Fudge (2024)

FAQs

How To Save a Botched Batch of Grainy Fudge? ›

To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves.

If you discover that your mixture is grainy, some quick thinking will save the entire batch. Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using.

The solution? A fudge do-over. Even though it set up properly, I threw it back into a saucepan with about 1 1/2 cups of water and gently heated the mixture to dissolve the fudge into the water. From there, I pretty much re-did the whole cooking process.

To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately. Alternatively, you can try to salvage chewy fudge by mixing it into ice cream or using it as a topping for desserts.

When making fudge, you are actually creating very tiny sugar crystals that feel velvety on the palate. The issue arises when large crystals form, which in essence create that grainy texture. This can happen from stirring the sugar mixture after it starts to boil, or from stirring it once it is already starting to cool.

Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done. Do not rely on the cooking time indicated in your recipe.

Grab the saucepan that you initially used to cook the fudge and toss the fudge back in along with 1 ½ cups of water and a splash of cream. Adding some cream of tartar is a helpful way to keep the sugar crystals at bay as well — it's not essential, but if you have some, definitely pour a little in.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

Beating the syrup caused the formation of crystallization nuclei, anchor points to which sugar molecules attach to form crystals. Few crystallization nuclei will form in syrup that is still hot, and sugar molecules will readily attach to them. The crystals grow so easily, and the result is really grainy fudge.

In principle for traditional fudge you could re-heat it by adding more liquid so that the sugars dissolve. You would then need to evaporate the excess liquid (but don't exceed the soft-ball stage at 237 F/114 C) to recreate your supersaturated solution.

How to tell if fudge is ready without a thermometer? ›

Using a clean spoon, carefully take a little of the syrup and drop it into the bowl of cold water. Leave to cool for a moment then pick up the ball of syrup. If it's pliable, sticky and can be moulded in your fingers easily, it has reached the soft ball stage and the syrup can be used to make fudge and marzipan.

Let the fudge rest at room temperature for 15 minutes before placing in the refrigerator, uncovered. Refrigerate until the fudge is firm, about 2-3 hours (or overnight), before slicing and serving.

OMG My fudge is grainy, what do I do? -

Pop the grainy fudge back into the pan along with some water and a little cream and melt the fudge back down to a liquid and re-boil it to temperature. Heat slowly to begin with and make sure the mixture goes completely smooth before bringing it to the boil.

Options for what you can do with your unset fudge:

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.

So, what do you do to save it if your chocolate seizes? Funnily enough, it's super simple. First boil some water. Second, very slowly, as in 1-2 tsp at a time add in the boiling water and whisk the chocolate vigorously until the mixture is smooth again.

If your Tablet is grainy but not sugary but you'd prefer it to be just a little smoother then it is all down to the beating. Once you take your Tablet off the heat let it cool for 2 / 3 minutes and then beat it for a good 5 minutes vigorously.

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

If the temperature is too low, the fudge will be too soft and sticky, and if it's too high, it will turn into a hard, crumbly mess. The ideal temperature to cook fudge is between 232-234 degrees F (111-112 degrees C).