Fudge-Making Mistakes and How to Fix Them (2024)

FAQs

Fudge-Making Mistakes and How to Fix Them? ›

Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture. Pay attention to the timetable specified in the recipe, and you'll get the hang of it after a batch or two.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

Good use of failed fudge: fudge that is too hard, too soft, too runny, too sugary, too chewy, etc. Proportions are as follows: for every 2 cups (roughly 1 pound yield) of any failed fudge that is not runny, you'll need 1 egg, ½ cup all-purpose flour, and ½ cup milk. If fudge is soupy, halve the milk (to ¼ cup).

To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

As strange as it sounds, it is a fact that weather affects fudge making. This is because when the weather is damper with an increased humidity level your Homemade Fudge Recipe will take longer to boil.

The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.

Points to remember

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

Can you melt and reset fudge? ›

To fix soft fudge or hard fudge, simply follow these easy steps: Scrape the fudge back into a large saucepan and add 1 1/2 cups of water. Stir the fudge over low heat until it dissolves. Carefully taste the mixture, as the water probably diluted the flavor.

Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done. Do not rely on the cooking time indicated in your recipe.

That appetite for fudge dates back more than a century. Food historian Joyce White says fudge is based on a recipe for chocolate caramels, which was very similar. "What probably happened is that there was someone in Baltimore, messed it up, or 'fadged' it," she said. "Fadge is a word that means you messed up.

Start cooking over low heat and stir until the sugar is completely dissolved. Don't stir for the rest of the cooking. The syrup temperature rises slowly at first, but a lot faster after 104 °C (220 °F). Don't get distracted!

– The most likely explanation is that your fudge didn't quite reach the full temperature it needed to be. If the mixture only ever reaches 110 or 112 degrees celcius it will always be soft. Our advice would be to buy a candy thermometer and take the guesswork out of the fudge making.

While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

If fudge is left unwrapped or accidentally put in a cold area/refrigerator then the result can be hard fudge. It is possible (but not guaranteed) to reverse this process by wrapping up your fudge in several layers of clear wrap. This allows the moisture to re-permeate into the fudge & make it soft again.

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.

By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals. Stirring also introduces air, dust, and small dried bits from the walls of the saucepan—all potential seeds for crystal formation.

The ratio of chocolate to condensed milk needs to be just right, otherwise you might end up with fudge that is too soft or too hard. Do not freeze the fudge to set it. Best way is to just be patient for a couple hours and set it in the fridge. If your fudge hasn't set, then you've gone wrong somewhere else.