How to Keep Your Cakes from Doming and Cracking (2024)

So why do cakes get taller in the center?Adriana Patterson, PhD, says, “The reason why cakes dome is because the outer perimeter of the cake sets before the interior. Generally, the batter touching the pan will heat more quickly as the metal is a better conductor of heat than the ambient oven air.” Sometimes, she notes, the outer perimeter sets much faster than it should, resulting in a big dome in the center of the cake. The cause here? Likely an oven that’s too hot.

How to avoid the dreaded dome

If you don’t already have anoven thermometer, it’s a wise investment. This handy tool will let you know what your oven’s temperature actually is when you’re heating it to 350 degrees (or any other temperature). Check the temperature once your oven is preheated—if it’s much higher, check your oven’s manual to calibrate it so that 350 degrees actuallymeans 350 degrees. Patterson also suggests simply lowering the temperature by 10 degrees if you notice your cakes significantly doming all the time. “This may be enough to equilibrate the temperature difference between the center and perimeter so that the cake rises at the same level,” she says.

If your cakes keep doming, even after checking (and calibrating, if necessary) your oven, it may be time to invest in a set of cake strips. “These are straps of fabric dipped in water and placed like a wet belt around the cake pan. Left on during baking, this effectively lowers the temperature of the metal and allows the cake to rise at a consistent even rate,” Patterson tells me. There are a few brands of cake strips out there, but theseWilton Bake-Even Cake Strips are pretty inexpensive and versatile. You can adjust them easily and secure them to your cake pans using the attached loops, and they’re oven-safe up to 400 degrees Fahrenheit. Pastry chef Cheryl Day offers another alternative: “lining the edges of the pan with a double layer of heavy-duty foil will prevent the pan from heating up too fast and help prevent the cake from doming in the middle.”

I bought a set of cake strips to see if they’d actually make a difference in my baking. I whipped together the batter for thisvanilla-buttermilk cake and wrapped one of the cake pans with the soaked cake strips and left the other unadorned. Sure enough, when the time went off, the cake-strip-lined layer was more level than the one baked without cake strips. I ran the same test with a boxed cake mix—and the cake strips won again.

Patterson points out that if your cakesstill dome significantly after taking these measures, the recipe itself may be the cause. “If there’s an imbalance of leavening agents (baking powder or baking soda plus acidic ingredients), the cake batter may continue to produce more carbon dioxide than necessary for the amount of cake batter,” she says. She also mentioned that there’s not necessarily a perfect ratio of leavening agents to other ingredients, since all cakes are a bit different. “However, a good starting point is one teaspoon of baking powder or one quarter teaspoon of baking soda (plus your acidic ingredient) to leaven one cup of flour,” she explains. If there’s a major imbalance of leavening agents, your cake may also have a soapy or chemical taste to it. Yuck.

Is cake doming really that big of a deal, though?

It’s natural for cakes to dome a little bit during baking. “Honestly, it’s not something I worry about. I usually just level with a serrated knife and embrace the dome for the top layer,” Day says. If you’re not confident that you can trim the cake to a flat level, you can also use acake-leveler for a more precise method. This tool has a sharp, adjustable-height wire suspended between two poles—simply stand it next to the cake you want to level, and push the cake through for foolproof flat tops. Patterson shares Day’s view on leveling cakes. “Almost every baker I know has to do a bit of dome-trimming before prepping for a large layer cake,” she says.

Wilton Adjustable Cake Leveler

Both Day and Patterson see the trimming process as an opportunity to take a baker’s treat for yourself, as well as a chance to inspect the crumb and flavor before decorating. There’s no need to make mountains out ofmolehills cake domes.

How to Keep Your Cakes from Doming and Cracking (2024)

FAQs

How to Keep Your Cakes from Doming and Cracking? ›

Check the temperature once your oven is preheated—if it's much higher, check your oven's manual to calibrate it so that 350 degrees actually means 350 degrees. Patterson also suggests simply lowering the temperature by 10 degrees if you notice your cakes significantly doming all the time.

How do I stop my cake from cracking and doming? ›

The oven temperature is too high. If the top crust forms and sets before the cake has finished rising, the middle will try to push through the crust as it continues to bake, causing it to crack and possibly dome. Check your oven with an oven thermometer and reduce the temperature accordingly if it is running hot.

How do I keep my cake from doming? ›

Lower the temperature and cook for longer: This is one of the easiest solutions. Lower the temperature by around 10-20°C and increase the baking time slightly. This will make sure the cake tin doesn't heat up too quickly.

Why does my cake dome and crack? ›

In an oven that's too hot, the outside of the cake cooks at a much faster rate than the inside. A crust forms early on, but as the inside of the cake continues to cook and rise, this crack crusts. You might experience the same problem if the cake recipe has too much leavener or if you've used a pan that's too small.

How do I stop my cake from rising in the middle? ›

  1. Try lowering the oven by 15 degrees and bake slightly longer/until a tooth pick comes out clean.
  2. cake pan bands can be moistened and wrapped around the outside of the cake pan to help keep baked goods level. ...
  3. Or you can put a flower nail in it while it bakes to help heat the cake through the middle.
Jan 30, 2023

Why does my cake rise in the middle and crack? ›

Too much baking powder can cause the cake to rise rapidly and crack. Always level off teaspoon measures of baking powder and bicarbonate of soda – a little extra can make a big difference. It's also important to use the cake tin size specified in the recipe.

How do you get a cake to rise evenly? ›

In order to bake cake evenly, you have to insulate its edges. Preventing the temperature of batter at the edge from increasing quickly allows the cake to rise longer before it sets. A cake whose edges rise at nearly the same rate as its center will remain flat across the top — no dome, perfect for stacking and icing.

How do you flatten a domed cake? ›

To level a cake with ease, position the blade right where the cake's dome begins to rise up. With a gentle horizontal sawing motion, cut roughly one inch into the cake, then rotate the cake about 45° and repeat.

How do you get rid of cake dome? ›

As Bhuvana says most just cut off the dome with a long knife. You can often just flip the cake upside down to the flat bottom side as well if the dome is not too high.

How do you make a cake that doesn't dome? ›

Lower the oven temperature.

Most cake recipes call for setting the oven at 350°F. Instead, drop the temperature to 325°F. Lowering the oven temperature slows the rise in the leavening agent, so instead of the dreaded dome, you'll get cake with a beautiful flat top.

Why do my cakes rise and then go flat? ›

You need to incorporate enough air during the creaming process to achieve a light and fluffy cake, without over or undermixing. Incorporate too little air and your cake won't rise enough. Too much air and your cake will collapse because it simply can't hold onto all that air.

How to make cake rise and fluffy? ›

To make a box cake mix rise higher, try using a smaller pan, adding an extra egg, using milk instead of water, adding baking powder, mixing for longer, using room temperature ingredients, baking at a higher temperature, or using cake strips.

Why does my cake bulge in the middle while baking? ›

lower the baking temperature: a high oven temperature will cause the edges to bake quickly and the middle to rise. Consider baking your cakes at lower temperatures for longer to bake a flat cake without a dome.

Why do my cakes collapse in the middle? ›

Your cake is often subject to sinking in the middle due to various factors, including inaccurate oven temperature, excessive or insufficient leavening agent, overmixing of the batter, or premature opening of the oven door. Moisture loss or incorrect ingredient ratios may also play a role.

Top Articles
Latest Posts
Article information

Author: Dong Thiel

Last Updated:

Views: 6732

Rating: 4.9 / 5 (79 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Dong Thiel

Birthday: 2001-07-14

Address: 2865 Kasha Unions, West Corrinne, AK 05708-1071

Phone: +3512198379449

Job: Design Planner

Hobby: Graffiti, Foreign language learning, Gambling, Metalworking, Rowing, Sculling, Sewing

Introduction: My name is Dong Thiel, I am a brainy, happy, tasty, lively, splendid, talented, cooperative person who loves writing and wants to share my knowledge and understanding with you.